High Country has a Proclimb tunnel and the XF has a Procross tunnel. I'm not 100% on the Procross tunnel length but my High Country has the same tunnel as a 153" Proclimb.

 

everybody knows that... he is looking for the lenght from behind the seat of your sled to see how much room he has on his after he puts the mountain seat on.

 

Measuring a H/C tunnel will not give you a proper length anyway--with the two sleds having different tunnels!! Seat length will be the same, but not tunnel length

 

The XF high country has the same length tunnel as XF procross (overall sled length 125"). I just figured it was the easiest way to get the measurement since not too many Procross have the mtn seat. Looking for the measurement from the top/back of the seat to the taillight mnt, the back of the seat slopes so base of the seat isn't a good measurement point.

Come on, I know all you guys are drooling over your new sleds in the garage, just reach for the tape measure . . .

 

...our hands are full....one hand has a beer in it,and the other one is on my....ahh never mind...our hands are full!:bc:

 

25-3/4" from rear point (seam) of the seat horizontally to front of light bracket
26-3/4" from the seat screw

I did take these before I finished my first cup of java however so they could be off a little.

 

I'll bet the measurements posted are pretty close. If the Procross tunnel is so different then the overall length would be different, which they are not. I highly doubt the Procross has a 6" of plastic hanging off the back or something. Thank you to all for your input.

 

I like that it looks nice and clean. Good work.

 

That pic is better than a measurement! I'm planning on the the exact same setup. Its unfortunate the rails are gonna hang over the edges of the procross tunnel a wee bit but i'll live with it. Mtn addiction rules.

 

I know they made the rails for proclimb a bit shorter but I'm not sure what they can do differently for a procross. Like i said I think they will just hang over the edge a bit.