[Oldman70]

if it’s all out traction chisels are the only thing to use. I can go 1.09 6oft with the boost. To run those 60ft time I had 18x37 gearing with 2.86 drivers 10 tooth anti ratcheting. Cut off track lugs with 300+ titanium chisels.

 

[trdehmer]

On vanilla ice ice. 20hp tune.

 

[London06]

if it’s all out traction chisels are the only thing to use. I can go 1.09 6oft with the boost. To run those 60ft time I had 18x37 gearing with 2.86 drivers 10 tooth anti ratcheting. Cut off track lugs with 300+ titanium chisels.

 

[London06]

I’d love to see this boost cutting 1.09 60’

 

[Oldman70]

Changing tracks sucks. It has the arrow track on it right now. Will pull 1.30s with this track and clutching. That clutch engagement was 5600 also. its about 50 pounds lighter then a stock one.

 

[London06]

Changing tracks sucks. It has the arrow track on it right now. Will pull 1.30s with this track and clutching. That clutch engagement was 5600 also.

How are you recording these times ?

 

[Oldman70]

100‘s of dragy times And timing lights. It’s faster on ice then it is on cement or grass.

 

[London06]

100‘s of dragy times And timing lights. It’s faster on ice then it is on cement or grass.

Post a pic of a 660’ time or hit the upload button in the app.

 

[Oldman70]

When we post times and leave out all the details it not fair to the reader. The stuff done to this sled is way beyond what most think of. i spend 100 of hrs making titanium and billet aluminum stuff on the cnc. Well I should say my kid programs it and I run it lol. We make rods, piston etc etc. carbonfiber rails. Bearings that cost 200 bucks a piece in the drive systems. I’m retired professional race car engine builder and fab guy. My brother is a mechanical engineer with a phd the thermal dynamic. Worked for skidoo for 27ish yrs

 

[London06]

When we post times and leave out all the details it not fair to the reader. The stuff done to this sled is way beyond what most think of. i spend 100 of hrs making titanium and billet aluminum stuff on the cnc. Well I should say my kid programs it and I run it lol. We make rods, piston etc etc. carbonfiber rails. Bearings that cost 200 bucks a piece in the drive systems. I’m retired professional race car engine builder and fab guy. My brother is a mechanical engineer with a phd the thermal dynamic. Worked for skidoo for 27ish yrs

That’s all standard stuff in the racing world. Nothing that you have described yet would have a boost running a 1.09 60’

 

[Oldman70]

standard hmm ok. Like my brother hyperMotorsport 800hp is nothing also. Cool.

 

[stroker2]

Time slips or it never happened ….Oldman70

 

[Oldman70]

Lol. then it never happened.

 

[London06]

Lol. then it never happened.

So it didn’t happen!

 

[Oldman70]

been around racing for over 40yrs. Nothing I post or say will make you happy. The only way this get solved is I do it right in front of you under the perf condition. It 60ft 1.12-1.14 must the time with the best of 1.09.

 

[BattleStorm]

I’m kinda curious about the old

been around racing for over 40yrs. Nothing I post or say will make you happy. The only way this get solved is I do it right in front of you under the perf condition. It 60ft 1.12-1.14 must the time with the best of 1.09.

Nah, you’re wrong. I think we’d be grinning if you were able to post some pictures.

 

[Oldman70]

Well where at it so you can pile on and assume I’m lying the sidewinder been 169.7 on a radar gun,

 

[Oldman70]

i cant defend myself without my kids iPad with all the dragy stuff. I have one old dragy time on this iPad sitting here. That time won’t Make you any happier. I don’t really care to old to care lol

 

[stroker2]

Correct we really don’t care . Are you from NH ?

 

[BattleStorm]

In the meantime, while you're getting the picture situation figured out let's hear about the 2019 XCR with the 930 NA making 251hp???