Hardcore Sledder banner
1 - 2 of 2 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
have a 98 600 efi,checked the stock pressure at wot and it was 46psi,installed the D&D single pipe and chip and checked it agian it was 44 psi,better but could be leaned out more,did any try this,what fuel pressure is safe for trail riding,drag racing,these things are brutal on gas and anything would help,have the bmp fuel kit so i can try anything,he told me to drop it 4-6 psi from stock but just wondering where to start,it also has v force delta 2 reeds???
 

·
Banned
Joined
·
995 Posts
HAVE A 2000 ZR 600 EFI, LE WITH D AND D PIPE ,CHIP, V-FORCE, FUEL REG. I RUN THE PRESSURE AT 40LBS ON THE GAUGE. PLUGS ARE A NICE MED TAN. RUNS LIKE NO OTHER 600 I,VE EVER BEEN ON...HAWK!!!!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top