Hardcore Sledder banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,244 Posts
Discussion Starter · #1 ·
ok so i have taken many of fellow HCSer's advice to go with 153 woody's megabite studs on my 05 f7 with ODS clutch kit. my next question is what carbides are you using with this setup. do you use standard 6" carbides, or shaper bars or dual runners? i was told if you get shaper bars or dual runners you will have a hard time steering and your arms will hate it. what are you guys running and is it hard for you to turn or i also would like to eliminate the darting. thanks
 

·
Registered
Joined
·
12,093 Posts
If your running mostly snow only, hard packed or groomed, your stock 6" carbides should be good, but I'd go with 8" sharper bars in the future. I think that would balance the sled fairly even with little oversteer or push.
 

·
Registered
2021 Polaris Matryx 850 Switchback Assault 146
Joined
·
2,713 Posts
1 - 3 of 3 Posts
Top