Hardcore Sledder banner

1 - 6 of 6 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
How do you take the voltage regulator off (clutch side of drive shaft)? Does it just pry off?
 

·
Registered
Joined
·
76 Posts
Remove the 3 burrs, and pry it off. It will come pretty tough, so be careful. Then unplug the connector. Why do you want it off?
 

·
Registered
Joined
·
44 Posts
Discussion Starter #3
thanks
I am trying to take my track out. I bought a long track kit going to try put it in tomarrow. Do I need to remove this to get the drive shaft out? Looks like with that off the shaft will side out.
 

·
Registered
Joined
·
76 Posts
What worked for us, take the burrs off the regulator, then take the gears out, and chain case off, then remove the suspension, jack up the rear end about 4' in the air, get under and take ahold of the drive shaft and "slam it" to the mag side. That popped the regulator off fairly nice. Then you can slide the drive shaft out, and change your track.

Good Luck!
 
1 - 6 of 6 Posts
Top