Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter #1
We are tring to hook up a VDO tach to a 2003 Arctic Cat F7. We aren''t having any luck getting the RPM signal from the motor. We have tried various wires that the wiring schmetics have shown to be the right wires. Nothing has worked so far. If anybody has any experience with this and knows which wires, or what tricks need to be done, please let me know.

Thanks in Advance
BM
[email protected]
 

·
Premium Member
Joined
·
2,693 Posts
Try the wires right at the coil. Possibly the orange one? I think thats the one I used on my 800 when I couldn't get mine to work. Try them both though. Did you set the switches inside the tach?
 

·
Registered
Joined
·
76 Posts
Discussion Starter #3
Yeah, we have the switches set. We had it on a Yamaha SX a couple years back, and wanted to switch it over, but haven't had any luck yet. Will try the wires right at the coil tomorrow.

Thanks,

BM
 
1 - 3 of 3 Posts
Top