Hardcore Sledder banner

1 - 5 of 5 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
Does anyone have the torque spec on the bolts in the rear skid? I want to check mine before I leave this weekend.
 

·
Registered
Joined
·
4 Posts
Originally posted by greenzrt@Jan 28 2003, 07:12 AM
Does anyone have the torque spec on the bolts in the rear skid? I want to check mine before I leave this weekend.
...as tight as you can get 'em with a 3/8" ratchet... B)
 

·
Registered
Joined
·
3,719 Posts
...as tight as you can get 'em with a 3/8" ratchet... B)[/quote]
But too tight is broke,I can break 3/8 bolts with a short 3/8 ratchet!If your still unsure drop a little locktight on the threads
 

·
Registered
Joined
·
3,719 Posts
I just glanced at my manual and all the bolt specs range from 20-30 ft lbs. torque
 

·
Registered
Joined
·
4 Posts
...as tight as you can get 'em with a 3/8" ratchet... B)
But too tight is broke,I can break 3/8 bolts with a short 3/8 ratchet!If your still unsure drop a little locktight on the threads[/quote]
must be a strong guy ;) I can't.

I should have said, as tight as you can get 'em COMFORTABLY with a 3/8" ratchet.
I rarely use a torquewrench. B)
 
1 - 5 of 5 Posts
Top