Hardcore Sledder banner

Temperature Light is on

868 Views 6 Replies 5 Participants Last post by  F-5 sno-pro
Went out riding last night with several friends and my temp light came on. Hit several water holes on our ride. I felt the heads, rails, and coolers but they all felt felt warm but not hot. Limped her home over loose snow as much as possible, stopping often to feel the heads. Just started it this morning and the light is still on. Just put her in my garage to thaw her out. Does anybody have any thoughts as to what's wrong or had the same problem. I'm thinking it might be moisture in a connector or maybe a bad sensor. I have 190 miles on the sled so far with out any problems except this. Please respond someone. I want to take it out this x-mas and ride but don't dare until I solve this problem.
1 - 2 of 2 Posts

· Registered
161 Posts
I have 170 miles on my f7 no problems so far, until tonight. Started my sled this morning to move it foreward on the trailer no light came on but noticed some codensation. Started the sled tonight to move into the garage and the temp light came right on. It ran for 5-10 minutes and it didn't shut off. Is this due to the codenstion in the engine compartment. Note the sled was ice cold when I started it to begin with. Any help would be appreciated.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.