Hardcore Sledder banner

1 - 4 of 4 Posts

·
Registered
Joined
·
380 Posts
Discussion Starter #1
I'm gonna be puchasing my 1st cat (T660) and was wondering what type of chassis is under it.(zr, zl?) I know nothing about AC but know I would like to swap the shocks (front, front rear) and the springs because of my weight. The brochure shows the 4-stroke having 10in travel in the front and the others 9.2. How would I go about finding the right shocks? (I did ask the dealer, he has to call the factory) Thanks
 

·
Registered
Joined
·
1,903 Posts
I have a 99 zl 600 and i installed front shocks off a 2002 zl ss they work much better than the old ryde fx non rebuildable shocks. Not to sure about the skid thought. The turbo is on the zl/zr chassis without the tunnel reinforments. Hope this helps.
 

·
Registered
Joined
·
1,903 Posts
check out old post of mine (better front shock setup)
 

·
Registered
Joined
·
4,053 Posts
I DONT KNOW WHAT SUSPENSION IS UNDER IT BUT THE DEALER I BUY MY SLEDS THROUGH SAID HE WAS HAPPILY SUPRISED IN THE WAY THAT IT HANDLED FROM BEING SUCH A HEAVY SLED
 
1 - 4 of 4 Posts
Top