[polarisman]

Is it possible to take an edge suspenion and put it in a 2000 xc which had an xtra 10, if so how hard will it be or will it bolt right up? Please let me know.

 

[n2oiroc]

if you can use a tape measure and pull rivets its easy. here is a link with measurements. http://www.jbshocks.com/edgemount.JPG

 

[jbshocks]

you need to move the support plates not just the holes. The mounting locations on my site that are posted above work great. I did 2 sleds in about 8 hours. Figure your first sled will take about 6.