Hardcore Sledder banner
1 - 1 of 61 Posts

· Registered
67 Posts

This is a great post, as it negates an earlier question I was going to ask. The image validates your findings, however I find it interesting that most sleds come set with moderate to significant tension on these springs. The perverbial, every rider is different is fine, but based on the Cat manual this should be your starting point, and not 2 inches higher. Are the dealers doing this on their own, or is it part of the factory recommended setup?

Thanks for the info.
1 - 1 of 61 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.