Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
244 Posts
Discussion Starter #1
I've never fogged my old sleds but this one I might ( F7 Sabercat std. with 1.375 track ). How would I go about it with the efi and the new engine style? Is there a place on the TB that I can spray the fog into without taking the air intake hose off?? I've always just started them up once or twice a month.
 

·
Registered
Joined
·
312 Posts
With my EFI sleds I've always just filled the tank to the top (to prevent condensation), add stabilizer and run it through. Start the sled about once a month. At beginning of season siphon out the gas and add fresh, never had any problems.
 

·
Premium Member
Joined
·
9,228 Posts
I have been using OMC stabilizer/injector cleaner for the last 6 EFI sleds I have owned. Keep the tank almost full (leave some air space for expansion) I also start em up at least once a month during storage. You can find the OMC stabilizer/injector cleaner at a outboard dealer. Never had a problem. I run the gas in the tank too on the first ride. I also put a Sta-Dri stick in the tank.
 
1 - 3 of 3 Posts
Top