[themaninblack]

i currently bought a 1.25 ripsaw, and i'm wanting to stud with 144 up the center with double and singles. my question is that this is last years track, and it has the (quiet track) the two sided ramps on the interior part of the track where the idler wheels go, so where do you put the studs? i surely can't put the studs where these ramps are. i want to know who has stud these newer ripsaws and how you eliminated this problem. thanks for the imput!!

 

[themaninblack]

anyone??? help!!!

 

[vince]

I studded a quiet track it wasn't a ripsaw and I just drilled through the quiet ramps without any problems.

 

[themaninblack]

this is what my track looks like on the inside, and the called it a 1.25 ripsaw. does the studs up on those ramps make any kind of a difference on the idler wheels, or how much shorter those studs will be with that 1/8th of an inch difference? thanks for the pics, that is what i am exactly talking about. it is just hard to explain, if you haven't seen one. thanks again. any addition from anyone else?

 

[vince]

The studs on the ramps made no difference to the idlers.

 

[zr sled head]

For optinum track life stud it up the center only................11,000 plus miles on my 1.25 track (so far) and going strong with zero pull outs.

 

[themaninblack]

thanks for the input, i really appreciate it!