Hardcore Sledder banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,004 Posts
I believe its when you get an elephant to sit on it and see if you max out the shocks
or
You crash test it into a brick wall.
 

·
Registered
Joined
·
841 Posts
Discussion Starter #5
You take some sodder and bend it to a 90 degree angle.......stick it in your cylinder and move the piston to the top and measure how thick the sodder is after it has been pressed between the head and piston........do on bolth cylinders and compare the difference......If one is out you can whack some thickness off the head to make bolth cylinders=......
 

·
Registered
Joined
·
336 Posts
:lol: :lol: :lol: :lol: :lol: :lol:
The only thing I fit in there is a small water bottle, and a ziplock of kleenex. But, I can do without the paper, as I always forget to grab it anyway!!

Happy Trails!
 
1 - 9 of 9 Posts
Top