Hardcore Sledder banner
1 - 9 of 9 Posts

· Registered
6,134 Posts
Discussion Starter · #1 ·
Heard that some FCs are having wires chaff at this location because the protective trim is not in the right location. This is on the mag side just before the wires turn upward. There is a piece of plastic trim that needs to be under the wires so they don't touch the sharp edge. This is easy, just make sure the plastic is in the right spot.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.