Hardcore Sledder banner

Soft F7

978 Views 1 Reply 2 Participants Last post by  teamgreen02
How much should the rear suspension settle when mounting a standard F7? Since I weigh 165 my dealer told me that I would want it on the softest setting. It would sink 9" when I sat on it. I set it at medium and found a slight difference. Now I have one side on stiff and the other is set on medium (due to the cheap adjuster block stripping). Still it seems very very soft. Anyone heavier than I bottoms it out just getting on it. What gives?
1 - 2 of 2 Posts

· Registered
Joined
·
2,306 Posts
Buy some aluminum adjuster block from Dennis Kirk or www.gripnripracing.com They run about $40 for a set. Dennis Kirk has some made by Lenco and some by BJ Hooker. Grip N Rip Racing makes their own. The ones on grip n rip racing increase the spring tension like 15% or something. I have the ones from grip n rip and they work awsome. Very easy to install.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top