Hardcore Sledder banner

1 - 1 of 1 Posts

·
Super Moderator
Joined
·
4,357 Posts
Discussion Starter #1
We did the drill bit thing to the smart valves on my friends f7. We took it out of the tank and undid the clamps that hold the screen , took the spring out and the plunger and drilled the the hole where the plunger sits into but we did not drill all the way thru the top of the smart valve we used a 7/64 bit and reassemble it. it seems alot easier to push up and down now doesnt bind like before. What is the purpose of drilling all the way thru to the top... Is the second valve supposed to float in the tank and follow the level of the gas in the tank
 
1 - 1 of 1 Posts
Top