Hardcore Sledder banner

ski lft

783 Views 6 Replies 7 Participants Last post by  BlackSaber7
i have a std. f7 all stock. i have the blocks set on 2. i still can't keep the skis on the ground. will adjusting the front shock in the rear suspenion keep them down? any thoughts would help, thanks
1 - 1 of 1 Posts

· Registered
Joined
·
166 Posts
In stock form the best you can do is loosen the front shock in the rear skid as soft as it goes, Lower the front end as low as it goes without risking losing your spring retainers on the bumps, and stiffen the rear springs and rear scissor stops on high.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top