Hardcore Sledder banner

ski lft

784 Views 6 Replies 7 Participants Last post by  BlackSaber7
i have a std. f7 all stock. i have the blocks set on 2. i still can't keep the skis on the ground. will adjusting the front shock in the rear suspenion keep them down? any thoughts would help, thanks
1 - 1 of 1 Posts

· Registered
61 Posts
Putting your coupler blocks on 3 still won't keep the ski's on the ground. Only difference is they will be 1 foot in the air instead of 2. Still can't steer and you will loose needed transfer when racing your buddies. Work with your center shock and limiter straps. Make sure you put some "real" trail miles on before tinkering. Mine had a bad push driving around the field after the first snow. Turned out to be a non-issue in actual trail conditions.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.