Hardcore Sledder banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,495 Posts
I assume you're replacing the OEM (stock) reeds.

Remove the belt.
Remove the secondary clutch.
Remove the air box.
Disconnect the carbs from the reed bellows.
Unbolt the reed cages from the cylinders. (disconnect any air breather tubes)
Remove the reed assemblies. (don't drop any screws)
Install the Boysen reed assy.
Install the carb boots to the reed cages.
Install the carbs to the boots.
Install the air box.
Install the secondary.
Install the belt.

That should be about it.
 
1 - 2 of 2 Posts
Top