Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
547 Posts
Discussion Starter #1
Hey Y'all, Me again..

I tried to set the toe out on my fusion today and it looks like I need to pull the motor to get to the adjustment points. Am I missing something obvious, or is everything almost impossible to get to?

Thanks,
E
 

·
Registered
2014 Polaris Indy 800 XCSP / 2005 Polaris Indy 800 XC
Joined
·
2,928 Posts
Hey Y'all, Me again..

I tried to set the toe out on my fusion today and it looks like I need to pull the motor to get to the adjustment points. Am I missing something obvious, or is everything almost impossible to get to?

Thanks,
E
Should b able to get at inner nuts by turning full left and right and push rubber boots back for access to inner nuts.
 

·
Registered
Joined
·
547 Posts
Discussion Starter #3
Should b able to get at inner nuts by turning full left and right and push rubber boots back for access to inner nuts.
Thank you!! That did the trick. Bit of a pain in the ass, but it's much better now..

Sent from my Pixel 2 XL using Tapatalk
 
1 - 3 of 3 Posts
Top