Hardcore Sledder banner
1 - 5 of 5 Posts

·
Registered
Joined
·
296 Posts
Discussion Starter · #1 ·
Hey,
I was wondering if anyone can give me some information on how to Fix the Ski Alignment.. I went for a ride on sled the other day and i noticed that when my ski's are straight my handle bar are turned to the left a little. I am guessing that i need to get me ski's aligned. I did a search but couldn't find anything. Any help would be Great. Thanks in Advance.

P.S. I would of did a search but something happen to the search button..

JCR
 

·
Registered
Joined
·
2,937 Posts
Get a nice straight 2x4 or other straight edge that you can but up against the tracks edge, and that will extend forward of the ski spindle. First verify that the track is properly aligned. Link both ski loops with a bungie cord or strap to remove any slop. With the board in place take a measurement from behind the spindle(Carbide mounting studs are a good place) to the edge of the straight edge, then a measurement from in front of the spindle. Typically try to get the forward measurement to be 1/8" more than the rear measurement(this gives you your 1/8" toe out). Repeat on the other side.
 

·
Registered
Joined
·
4,259 Posts
1 - 5 of 5 Posts
Top