Hardcore Sledder banner
1 - 11 of 11 Posts

·
Registered
Joined
·
927 Posts
you actually dont "need" anything for a 6 inch. my 2005 has one and everything reaches, you just need to re route the cable and move the brake lever to the inside a couple cm.
 

·
Registered
Joined
·
159 Posts
I just put a 6.44" riser on my o6 F7, the brake line was to short so I went to the auto parts store on got a pre made line and coupling and it fit perfect.
 

·
Registered
Joined
·
47 Posts
Discussion Starter · #5 ·
thanks guys i orderd it yesterday and ordered a exstended brake line just in case..how is the 6" when siiting down????
 

·
Registered
Joined
·
1,120 Posts
thanks guys i orderd it yesterday and ordered a exstended brake line just in case..how is the 6" when siiting down????[/b]
You should not eed anything but some new zip ties and some rerouting of the cables / lines. Had mine on rerouted and re ziped in about 15 - 20 mins. so you should be fine. 6 inch made ALL positions WAY better. I am 6'2" and sit down makes my arms about perfect and the ransition from sitting to standing easier. You will love it ... damn near the best 30-50 bucks you can spend on an F- cat IMO
 

·
Registered
Joined
·
94 Posts
Sorry to jack the thread, but would I have to extend anything on an 03 F5?[/b]

what connections is it on the brakeline?
havent anyone close to me that sells a extension-brakeline.
so im thinking about doing my own, but i dont have the sled here where i live.
is it 3/8", 7/16 or is it m10? or what is it?
and how does the connection look like?

is it flat or is it rounded?

http://www.paragonperformance.com/Images/B...dapters%201.gif
 

·
Registered
Joined
·
130 Posts
I've got 6 + iso-vibe on 05 f7 w/dd.
and had to make an extension about 4-5" long.
I belive it is 3/16 line, you'll also need a union.
The non dd sleds, I don't think you need to do anything.
 
1 - 11 of 11 Posts
Top