Hardcore Sledder banner
1 - 4 of 4 Posts

·
Registered
Joined
·
262 Posts
Good luck with that. I haven't looked at mine, but if it's any thing like my buddy's Yamaha I would have it soldered or welded.
On the Yamaha it is a structural component of the tunnel. What a pain in the ass. Half way through he really wished he would have repaired it in place.
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #4 ·
finally removed damaged front heat exchanger, wasn't as bad as thought but stilll a pain!!, I am going to mod the new one with an additional plate of aluminum just in case ,for preventive maintnance.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top