Hardcore Sledder banner

1 - 5 of 5 Posts

·
Registered
Joined
·
743 Posts
Discussion Starter #1
I was talking to a friend who is pretty good when it comes to getting a bit more power out of a sled, He said he thinks, (But just a guess) That we would get the same results from just spacers on you stock Reeds, And it is a lot cheeper Then V-Force reeds, But I was wondering what would happen if you ran spacers on V-Force Reeds if anything, Has anyone tryed them togather? or compared Just spacers on your stock reeds to V-force reeds?
 

·
Registered
Joined
·
2,350 Posts
No you will lose power the case intake track will be to long! Too much case area! Put a set of V-force 3 in it and you will have done the best thing you can do to the reed area!
Skydog
 

·
Premium Member
Joined
·
7,417 Posts
a friend of mine has both on his sled and the bolts hit the frame on the pto side. another has just reeds and the throttle response is better than with both
 

·
Registered
Joined
·
780 Posts
D&D has tested reed spacers on the new lay down motors(It was actually an 800 Sno-Pro motor based on the F7) and they say you actually lose 2-3 hp on the dyno, don't bother with them. V-Force 3 work great though.
 
1 - 5 of 5 Posts
Top