Hardcore Sledder banner

1 - 2 of 2 Posts

·
Registered
Joined
·
820 Posts
Discussion Starter #1
I was wondering if the bad rebound alot of people were getting from the skid shocks are because the shocks are wore out and we are bouncing on the spring setups, there is alot of spring pressure under there!
just a thought!
 

·
Registered
Joined
·
313 Posts
I revalved the front skid of my sno pro. I softened the compression and left the rebound. It made a huge difference, but I bottom out on 6' jumps now. Perfect for trails though, even moguls. I think I'd rather put a softer spring instead of revalving though. The stock is a 160lb/in. spring. I'd like to try a 140lb/in spring and put the valving back. I think it'll give the ride we are looking for w/o the bottoming on large jumps. Either that or go to a dual rate spring. The suspension isn't rebounding to quick, it just isn't compressing easy enough on smaller bumps.
 
1 - 2 of 2 Posts
Top