Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,647 Posts
Discussion Starter #1
Hi all. I havent had time to do much tinkering with my rear skid but was wondering if anyone had some quick tips for me.
I have a standard f7 and I weigh 220lbs.
I do alot of drag racing and then river running and ditch banging.

I was a little confused when the book tells you to put the springs on setting 1 on left side and setting 3 on right side.
Usually when I change the settings from one side its to get my sled to pull straighter, not to help the ride.

What do you recommend I do for my fat ass and drag racing.
THanks. :D
 

·
Registered
Joined
·
831 Posts
i'm about 200#. i set the springs to the chart ,lightest on left ,highest on right. coupling blocks on lowest setting. sled rode very nice this way. i've now moved the blocks to position 3 and tightened limiter straps about 1", because i've been experimenting for ice drags. haven't rode on trails with this setup yet.i'm anxious to try the added ski pressure out on the trails.
 
1 - 3 of 3 Posts
Top