Hardcore Sledder banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
i just aquired a 76 tx340 from a friend and plan on setting it up for oval ice racing...my buddy got it and it did not have a spark and he never got around to looking at it...well today i started working on it and tried two cdi boxes along with two different coils and cannot get a spark..both the key switch and kill switch are unplugged so that should rule them out as a problem...i pulled the flywheel off and everything VISUALLY looks ok with the stator plate...the wiring from the stator plate to the cdi looks good and from the cdi to the coil looks good...are there any tests a peson can perform to see if the stator plate is the problem? and any other ideas would be greatly appreciated
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top