my friend has 9 inch total rise on his 04 f6 (4.5 stock riser plus 4.5 bars) and they fit fine. i hear of people puting 8 inch risers with little cable room left. My question is...can i get 9 inch total rise on my 03 f5? thanks
my friend doesnt have extentions on his 04 f6...where the 04s longer? i have plenty of brake cable on my f5, but too tricky to measure throttle. anyone else have experience?
i have about 9 inches of rise with my stock riser and fly bars. The fly bars are a few inches wider then the stockers, so the brake and throttle get pushed out to the side a bit more and i was able to use the stock throttle cable after re-routing it, and i made myself a 5 inches brake line extention basicly just to clean up the look of the bars. I could have prolly got away without the extention
I believe the brake line is a tad too short to go up 4.5 additional inches beyond stock without some sort of extension,otherwise it pulls on the master on full left turn.
I know bluebear had to do a brake line ext on his sled with 9 in of rise and I thought maybe a throttle cable too but ? Sure if you rig it half ass it might work but most people try to do this right the first time .
04 F7, 9" of rise and I HAD to put a new brake line and a throttle cable extension on it. No way you can do 9.5". Get an M7 brake line and have a local bike shop make you a custom thottle cable.
i wonder how my friend fit his on. the cables still have some slack too. weird. well i just decided to put a 8 inch powermadd riser in and call it good. i didnt want to buy new bars and new handwarmers and grips. ill put that money towards new skis. thanks for the help
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
A forum community dedicated to snowmobile owners and enthusiasts. Come join the discussion about performance, trails, riding tips, modifications, classifieds, accessories, troubleshooting, maintenance, and more!