Hardcore Sledder banner

1 - 2 of 2 Posts

·
Registered
Joined
·
526 Posts
Discussion Starter #1
My brother and I both have standard f7's and we rode from Winchester Wisconsin to Copper Harbor. Both of our pipes split the seem right on the bend. The guys who welded them back together said the spot welds sucked! We had to get them welded to keep riding because the splits were about 8 inches long! Trails were rough but they should have held up to the pounding. I hope this isint going to be another recall. :angry:
Bulldog
 

·
Registered
Joined
·
1,205 Posts
Sorry, It has been a Known problem, my friends did it too. Cat I guess found out that some of the pipes were not welded properly on the F7's.....SHould be no problem to get it warrantied
 
1 - 2 of 2 Posts
Top