Hardcore Sledder banner

May want to check front most A-arm bolt

537 2
Bolt 19


I've found two of these loose on both of my sleds. It can be found when there is no load on the front. Grab your a-arms or spindle and move it around. If you can feel movement it's likely around that location in the front.


You can access the bolt by pulling the boot off. I believe the torque on this is about 65 ft/lbs but there is enough room to get a socket and torque wrench in there. You don't need a wrench in the other side as there is a plate holding the nuts on.


I was actually quite surprised at how loose it was based on the torque rating and size of the bolt. Both my sleds had about 3k mileage.
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Top