Hardcore Sledder banner

1 - 1 of 1 Posts

·
Registered
Joined
·
424 Posts
Discussion Starter #1
took my pipe off and looked at my pistons,didnot like what i saw.so off to my dealer i went. first we did a compression test both sides were around 130ish with rubber push on gauge, he said this was fine. so next we pulled off pipe and he took a look and shook his head.the blow by on the clutch side was downas far as you could see the mag side was down about 1inch and a half.so we tore it down and found clutch side piston blow by all the way down to bottom.lucky he had new piston & rings in stock.sled has 910 miles on it use spectro snythetic oil
 
1 - 1 of 1 Posts
Top