Hardcore Sledder banner

Lima Project

178K views 726 replies 90 participants last post by  calltrex 
#1 · (Edited)
Welcome to the Lima Project!

:pointlaugh: Lima is Spanish for Lime!


2019 Swtichback Assault 850

144 Track with 2" paddles

Lime everything



Will list all parts I can here I install

Arctic Cat Tether adaptor harness Polaris | CatzAss
Magnetic Arctic Cat 2 stroke Tether #8639-074
Extra Tall windshield Polaris #2883078
850 12v harness Power kit Polaris | CatzAss
850 12V Power connector kit Polaris | CatzAss
850 Tether Kit Polaris | CatzAss
Secondary Bearing- Polaris | CatzAss
Secondary Shims .060 each Polaris | CatzAss
Primary Shim kit - Polaris | CatzAss
Loctite Moly paste 51048
Gripper Skis - Polaris #2877679-070
HD Rubbers- DuraPro Ski Dampener - Polaris AXYS & Pro-Ride (Per Set)
Dual Carbides- woodys DP4-1300
Easy Tile rubber - Home Depot About $12 for pack of 10
Nipple covers- KTM dealer clutch nipple covers
swaybar - 5/16 pin from auto parts store
Front Monarch bumper - Polaris 2883681-630
Ultimate Skidplate - Polaris 2880383-630
Up north adaptor plate- Single-Position Stand-alone LINQ™ Adapter Bracket Systems
Rear wheel adjuster spacers Polaris #5137152
Clutch alignment tool polaris tool # PS-51607
Skinz Knee Pads # PCKP600-BK
Intake seal - Polaris # 2206045
Handguards Polaris # 2879192
Handguard Mounts Polaris # 2880939
Handlebar storage bag Polaris # 2880971
Mid Gloss windshield Polaris # 2882058
Rear Extreme Bumper Polaris # 2881941-458
Tall windshield Polaris # 2880394
Clutch Remover Polaris #2872085
Loctite Moly paste 51048
RCA new 850 complete cord Polaris #2883824
Kodiak Light bar 7" Single Row LED Light Bars - Kodiak LED Lighting
Ram 6" arm Part# RAM-B-201U-C
Ram Bar mount Part# RAM-B-231ZU
Ram Gopro mount Part# RAP-B-202U-GOP1
Ram extend Joint Part# RAM-B-230
Session 5 gopro cam
Burandt Grizzly Handguards Skinz Burandt Grizzly Gauntlet | chrisburandt
Double Light Bar - Shop LED Lights | Warehouse, Vehicle, Off-Road | Kodiak LED Lighting
Bar mounts RAM-B-231ZU
Socket arm RAM-B-201U-A
Balls RAP-B-379U-M81208
RSI stop switch KS-1-Black
Tapp USB- https://www.3brpowersports.com/products.php
Tapp seal cap- https://www.3brpowersports.com/products.php
Pull start handle rubber Part#5414288
2020 temp sensor Part# 2208359
Cobra cord pull rope https://www.cobrapullcords.com/products/snowmobile-cobra-cord
charger port https://fortnine.ca/en/tecmate-optimate-sae-socket-with-front-panel-mount
LED under lights https://www.boogeylights.com/66-led-hi-intensity-light-kit/
Lime spray paint i used - Key Lime from Home Depot
850 12V Power splitter under bars Polaris | CatzAss
Modern GOPRO REMOTE https://shop.gnarlab.com/products/gnarpro

.
 
See less See more
#2 ·
#6 ·
#9 ·
Ship it back, according to facebook the pistons are junk and this engine will explode in under 2000 miles :D
 
#13 ·
just got it running to get it in trailer

finish it at home

trailers first haul :buttrock:

.
 

Attachments

#18 ·
Installed gripper skis

installed the HD rubbers. Skis dont flop around and stay pointed up when off ground

used molly paste on bushings and bolts

its a bit hard getting the bolts in. thats the point

.
 

Attachments

#20 · (Edited)
wow

Welcome to the Lima Project!

:pointlaugh: Lima is Spanish for Lime!


2019 Swtichback Assault 850

144 Track with 2" paddles

Lime everything

.
wow I some how missed all the earlier post in the black scorpion thread till now about your accident well I'm glad your ok and getting back into it, I/coldguards wish you a merry Christmas and a happy new year and maybe be a part in this new build.
marko :thumbsup:
 
#23 ·
if anyone has the dash off you should double check you dont need the fuel pump changed.

You can see it with a flashlight on top of the fuel pump.

If it has a 8 then it was supposed to be changed. take it to your dealer.


mine has a 10 :thumbsup:


.
 

Attachments

#24 ·
I had no idea they changed the overstructure to Carbon fiber.

that was nice :buttrock:

.
 

Attachments

#29 ·
bags dont come installed from factory.

good then i dont have to remove it.

installed the plastic grate under bag to keep any moisture buildup and inside bag stays dry

you dont even know its under there :buttrock:

.
 

Attachments

#30 ·
Installed sway bar disconnect

remove bottom bolt

just a 5/16 quick pin. heated shrink tube on curve part

.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top