[bimmer1]

Hi Guys


I put a can on my xcr700 it has stock pipe's, my question is do I have to re-jet? I heard that I might have to, I have V force 3 reeds and it's a non valve motor.

Thanks J

 

[xc-mark]

you should be fine , most sleds are 2 sizes to large on the main jet anyway.

 

[westernstar00]

:banghead: the can will require no change in jetting because about all they do is save a little weight, and add a little noice.

 

[bimmer1]

thanks guys I didn't want to run lean as we all know what would happen.

 

[mr-xcr]

You may be hot in the midrange from the reeds did you check it out? They always seem hot there. Run it at your criusing speed on the lake for a while and shut it down and check out the wash. You may be surprised at what you find.