Have to add it is an Axys


Sent from Snowmobile.com App

 

Post a pic for us!

 

I just put mine on my assault. On my skid there was 2 3/8" holes already on the rails so I used that. They work awesome. Was running hot all day. Took it down the plowed road and trail and Temps never went above 131

 

I have a buddy coming over on Sunday to see where I installed my ice scratchers and he runs a Pro X 800 switch. Any of you guys have a pic of where you installed yours on that skid? Thanks (I'm assuming he's got the cable type, I run the duraflex)


Sent from Snowmobile.com App

The Duraflex is a cable type scratcher. It mounts thru a 3/8" hole in the slide rail. The hole should be 2 to 3 inches up from the inside surface of the track. Most people use a hole that is too low on the slide rail, and the angled base of the scratcher, interferes with the internal drive lugs of the track.

 

Ok so there is an existing hole on the axys? I just drilled out an existing 1 on my cat and the duraflex I have to say I've been impressed with.


Sent from Snowmobile.com App

 

Here is a pic. Make sure the hole is high enough and far enough away from the idler wheel mounting block so you can still get a wrench on the bolt!

 

rbott did you drill that hole or was it there? Just got the Duraflex scratchers for mine and didn't see an existing hole to use

 

I drilled a new hole.

 

Thanks for the pic!! It looks like you have to drill a new hole not too many other options.


Sent from Snowmobile.com App

 

Yes thanks for the pic. answered my question also