Hardcore Sledder banner
1 - 6 of 6 Posts

·
Registered
Joined
·
112 Posts
Just got done pulling the pan last night. Dropped 17 mm wrench in. It swallowed it right up. Very simple to take off, just a few screws. Much easier than trying to fish it out .
 

·
Registered
Joined
·
3,423 Posts
I would agree that taking the front portion of the bellypan would be easiest also....unless you have installed a skid plate. Then, since the skid plate is riveted on, I would remove the airbox to get the dropped tool. You will have to remove the hood to be able to remove airbox, but removing the hood is a 5 minute(or less) job on the Firecats.....
-John
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top