Hardcore Sledder banner

hooking up heated shield

306 Views 1 Reply 2 Participants Last post by  firecat_freak
Please help me out. I hooked up my heated shield before my ride last night. All went well until I went to start the sled. It fired up beautifully but immediately noticed that my tach/speedo wasn't working anymore. That really being the least of my worries, I headed out anyway to meet the boys. Started up the field and engine popping etc. , acting very wierd. So i stopped, pulled the hookup apart and on came the tach/speedo again and the F-cat came back to life. Anybody have any clues? I hooked up behind the servo located on the "firewall" sort o' speak where the open plug is located. ------ other than not having my heated shield, we did 97 miles on a beauty of a full moon night. table-top groomed trails, nothing was better forDec. 18th. -----by the way, taking some preload off the skids front shock really made this thing attack the corners! Great post Rob! Any help would be greatly appreciated.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top