Hardcore Sledder banner
1 - 1 of 1 Posts

·
Registered
Joined
·
40 Posts
if the temp sensor detects that the engine is too hot it will go into an over rich condition. check the black and yellow wires by the coil and make sure they are not disconnected. if you look at the red led on the computer, it will flash a code when you start it if a problem exists. 2 flashes detects an open in water temp circuit. :eek:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top