Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Went riding this past weekend and on the last day I noticed my bars are turned while I'm going straight. I don't remember hitting anything w/my skis but they were toed in as well. Sled was darting and the whole bit. I adjusted 1 ski on the trail (to make it toe out) but couldn't get my bars back to straight. I tried to adjust the rod next to the engine and it seems to work until I ride the sled again. Any suggestions? This is my first Cat so I'm new to the a-arm thing. I had the sled toed out according to Rob's specs. and it was railing prior to this. I guess I caught a carbide on something? Thanks for the help.

Jamie
 

·
Registered
Joined
·
202 Posts
You know I had the same problem....with my F5....I noticed it right off the bat....I sat down and my handlebars were not straight..so it was a good thing...I sent my machine in...had them look at that...and replace the handlebars....and riser with fly bars...and it should look sweet...and hopefully they will be straight... :)
 
1 - 3 of 3 Posts
Top