Hardcore Sledder banner
1 - 8 of 8 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
Hey=P I'm changing the bars of mye snowmobile, and i wonder. Can I get my hand warmers and grips of without breaking them? Is there a secret way to do it=P? Thnks in advance
 

·
Registered
Joined
·
44 Posts
Discussion Starter · #3 ·
use a air compressor and blow them off. easier with two people. Insert air nozzle into the hole at end of grip,plug the other end, and pull.[/b]
Thanks. By th way! I had the same graphics as you, before i sold it=P
 

·
Registered
Joined
·
6,976 Posts
Be VERY careful not to damage or cut the handwarmer underneath. It's worth the 10 bucks a piece to carefully cut the old grip off and save the $40 per handwarmer if you damage those. TAKE YOUR TIME!
 

·
Registered
Joined
·
430 Posts
The air nozzle in the bar end for removing the grips works great. Have done it several times. As for removing the glued on handlebar warmer pads, they may peel off ok, but reglueing might be a pain.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top