Hardcore Sledder banner
41 - 60 of 71 Posts

·
Premium Member
MY21 650 SBA 146, ES, ICE Storm 1.5
Joined
·
6,322 Posts

·
Premium Member
MY21 650 SBA 146, ES, ICE Storm 1.5
Joined
·
6,322 Posts
The rubber snubbers that are recommended for use with the Gripper skis on Matryx flatland spindles, are Polaris part# 5412794 @ $12USD. For MY22 they are used in the Matryx Flatland International sled models, about a dozen of them, including the Matryx 650 Voyager and the Matryx 650 NordicPro. You will need 2 of them.

They are NOT the same snubbers used with the Matryx mountain sleds: Kaos, Pro RMK, Slash, etc. Also NOT the ones used by most AXYS mountain sleds.
 

·
Registered
Joined
·
312 Posts
The rubber snubbers that seem to be recommended for use with the Gripper skis are Polaris part# 5412794 @ $12USD. For MY22 they are used in the Matryx Flatland International sled models, about a dozen of them, including the Matryx 650 Voyage and the Matryx 650 NordicProd.

They are NOT the same snubbers used with the Matryx mountain sleds: Kaos, Pro RMK, Slash, etc. Also NOT the ones used by most AXYS mountain sleds.
Excursion,

I have a 22 850 Assault on order. I ordered Gripper skis with my dealer. I also ordered the RMK rubber part # 5415230. What is the correct rubber I should be using for my new sled?
 

·
Premium Member
MY21 650 SBA 146, ES, ICE Storm 1.5
Joined
·
6,322 Posts
If you look at the Polaris parts book for your sled, the diagram for the INTL skis, shows exactly what is needed with the Gripper skis.

The rubber snubbers that are recommended for use with the Gripper skis on Matryx flatland spindles, are Polaris part# 5412794 @ $12USD. For MY22 they are used in the Matryx Flatland International sled models, about a dozen of them, including the Matryx 650 Voyager and the Matryx 650 NordicPro. You will need 2 of them.
 
  • Like
Reactions: polaris bob

·
Registered
Joined
·
166 Posts
Thanks for the snubber part numbers, Excursion. Have Grippers on order from Poo for my 22 Assault 146. They didn't have the snubbers in stock, but I found them online at a dealer. Will be nice to have the right parts in hand ready to go when my sled finally arrives.
 

·
Registered
Joined
·
2,061 Posts
If you look at the Polaris parts book for your sled, the diagram for the INTL skis, shows exactly what is needed with the Gripper skis.

The rubber snubbers that are recommended for use with the Gripper skis on Matryx flatland spindles, are Polaris part# 5412794 @ $12USD. For MY22 they are used in the Matryx Flatland International sled models, about a dozen of them, including the Matryx 650 Voyager and the Matryx 650 NordicPro. You will need 2 of them.
That part number is what comes on axys swa 19-22.
 

·
Premium Member
MY21 650 SBA 146, ES, ICE Storm 1.5
Joined
·
6,322 Posts
Matryx are different….that’s what all the confusion is about. I’m still not sure what to order
That part number is what comes on axys swa 19-22.
The 5412794 (<-Corrected) part number, is Not shown in the parts books for MY21 Axys SWA 144.
There is no Polaris MY22 Axys SWA 144.

Matryx are different….that’s what all the confusion is about. I’m still not sure what to order
My post was pretty clear about what to use on Matryx flatland sleds with Gripper skis.
Get what the parts books say: in the diagram for the INTL skis: Ski rubber 5412794 (<-Corrected)

OR

You could lookup the MY22 Matryx SBA 146 and see what rubber snubbers are used on the Intl model ski diagram (Grippers).
 

·
Registered
22 VR1 850 129 and Mxz 600 etec
Joined
·
225 Posts
The 5412974 part number, is Not shown in the parts books for MY21 Axys SWA 144.
There is no Polaris MY22 Axys SWA 144.



My post was pretty clear about what to use on Matryx flatland sleds with Gripper skis.
Get what the parts books say: in the diagram for the INTL skis: Ski rubber 5412974

OR

You could lookup the MY22 Matryx SBA 146 and see what rubber snubbers are used on the Intl model ski diagram (Grippers).
Excursion, can you confirm the part number please. In post 44 the number is 5412794. In the above post it’s 5412974.
Did the 7 and 9 get transposed? Thanks for the info, ordered the grippers for my MY 22 Vr1 129 and want get the correct snubbers.
 

·
Registered
Joined
·
2,061 Posts
The 5412974 part number, is Not shown in the parts books for MY21 Axys SWA 144.
There is no Polaris MY22 Axys SWA 144.



My post was pretty clear about what to use on Matryx flatland sleds with Gripper skis.
Get what the parts books say: in the diagram for the INTL skis: Ski rubber 5412974

OR

You could lookup the MY22 Matryx SBA 146 and see what rubber snubbers are used on the Intl model ski diagram (Grippers).
I tried those last year and had to shim them because they were too loose.
 

·
Premium Member
MY21 650 SBA 146, ES, ICE Storm 1.5
Joined
·
6,322 Posts
Excursion, can you confirm the part number please. In post 44 the number is 5412794. In the above post it’s 5412974.
Did the 7 and 9 get transposed? Thanks for the info, ordered the grippers for my MY 22 Vr1 129 and want get the correct snubbers.
Thanks for catching my error, I have corrected that post. 5412794 is the number in the Polaris parts book for the MY22 Matryx flatland INTL trim sleds factory equipped with Gripper skis.

The Matryx mountain sleds have different spindles, than the flatland sleds. The Matryx mountain sleds use 5415230 Rubber ski snubbers, same as some AXYS mountain sleds.
 

·
Registered
22 VR1 850 129 and Mxz 600 etec
Joined
·
225 Posts
Thanks for catching my error, I have corrected that post. 5412794 is the number in the Polaris parts book for the MY22 Matryx flatland INTL trim sleds factory equipped with Gripper skis.

The Matryx mountain sleds have different spindles, than the flatland sleds. The Matryx mountain sleds use 5415230 Rubber ski snubbers, same as some AXYS mountain sleds.
Thanks for clarifying.
 
41 - 60 of 71 Posts
Top