[lincoln9]

I have a ZR 440 that is currently engaging at 5500rpm and holding 8500 rpm all the way thru. I would like to keep the engagement rpm but raise the operating rpm to between 9000 and 9200 to perform along with a new set of twin pipes. I have three sets of weights which I can work on the current ones are 46g I have 45g and 47g How much weight do I need to get rid of in theory to gain 700 rpm and where is the best spot heel or toe or complete surface?

 

[Fast 440]

try the 45 first, otherwise to gain top rpm's you will have to grind the tips lighter, or put in a spring with at stronger finish rate. Try a orange/white spring first if you don't already have one in there.

fast