Hardcore Sledder banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3,601 Posts
Discussion Starter #1
Whats the amount you guys are running I have a 2000 ZR600LE with Fox clicker shocks. Right off the bat i can't tell you what i have, 2-3"? But seems like i have quite a bit of thread left on the shock to adjust. Right now i have them set at (4) My weight 200 with gear and i want the sled set up for aggressive riding.Any thoughts?
Steve in Ct
 

·
Registered
Joined
·
636 Posts
as long as you are not bottoming and you dont need more ski pressure i would leave it as soft as you can. normally i would put about 3/4 inch of preload from the springs relaxed state then adjust then go from there.
-
 

·
Registered
Joined
·
636 Posts
take a zip tie and put it on the shock shaft snug it up and cut off the excess. push it all the way down on the shock cap. then go beat the snot out of it and see how much travel your using. it makes no sence to pay for that 9-10iches of travel and crank the springs up so tight your only using half.
 
1 - 4 of 4 Posts
Top