Hardcore Sledder banner

1 - 6 of 6 Posts

·
Registered
Joined
·
142 Posts
Discussion Starter #1
Ok...What is the trick to get the plug wire out from behind the steering column.. :eek: ....Any suggestions ?

Thanks !
 

·
Registered
Joined
·
6,125 Posts
The spark plug caps can be removed from wires-then just pull the wire through and reconnect cap
 

·
Premium Member
Joined
·
4,428 Posts
Originally posted by BY AC@Dec 24 2002, 01:28 PM
Ok...What is the trick to get the plug wire out from behind the steering column.. :eek: ....Any suggestions ?

Thanks !
If you are doing the speedo fix, there is no need to pull the wire out.

DO NOT FLIP IT END FOR END.
 

·
Registered
Joined
·
6,125 Posts
According to the recall-the coil high tension leads must face down(rotate coil 180)-also there recommending putting the wire in front of steering post not behind it,so yes that plug cap must come off-scott
 

·
Registered
Joined
·
142 Posts
Discussion Starter #6
The correct way is as Skydog said...unscrew the pug wire form the cap..No problem...One it was done the short plug wire was a little to short.I will have to give it a second look ???? Anyway its snowing here in lower SE mich and I must go ride......
 
1 - 6 of 6 Posts
Top