Hardcore Sledder banner

Firecat twin pipes

531 3
I am using a set of D&D twins on my F7 and am wondering where I can purchase a wrap for the pipes to hold in the heat or is this not needed. I'm a beleiver that hot pipes perform/work better?
1 - 4 of 4 Posts

693 Posts
I got my header wrap at the local speed shop. You will use more then you think, if I recall I used 2.5 rolls of 2.5" (40' per rool i think) when i wrapped my twin pipes. The way to make it easier to use is make it damp run some water over the material first, it holds it shape much better. If you can place one end in a vice(gently) or have a freind hold the pipe it will be tight and smooth. Use some tape as you go to hold the wrap in place, I then covered mine in the silver heat tape, didnt want to look at the wrap. They do have black wrap out there just its more expensive.

Your hands will itch if you dont wear gloves

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.