Hardcore Sledder banner
1 - 9 of 9 Posts

·
Registered
Joined
·
1,245 Posts
Discussion Starter · #1 ·
I am hearing rumors that putting the F1000 gear in a F8 really wakes them up. I was told not to do this from D&D because that gear at 7850 rpm would run about 140mph(which ofcourse wouldn't happen). That gear is suppose to run 7200 rpm or so, but real world, real people answers is what I am looking for not some one trying to sell me $850 worth of junk that will make me go 1mph faster but take longer to get there ( sorry for the venting there). Has anyone done this? pm me if you want, thanks guys.
 

·
Registered
Joined
·
2,937 Posts
F8 running 7800 revs with 66/54's, belt will be coming out the top of the primary at around 130mph, 1:1 gear(7.3" belt diameter in the primary, 7.3" in secondary) is 107mph. I wouldn't say its to much gear, you don't need that much, but I'd rather have 66/54's then 62/58's in an F8.
 

·
Registered
Joined
·
63 Posts
put the cross fire gear 65/55 the f-1000 will kill you in snown but is good on long run icei ran 119.6 in 2000 feet but in the snown wasnt to good over all the cross fire gear works good 117.00in 2000 feet
 
1 - 9 of 9 Posts
Top