Hardcore Sledder banner

f7 snopro ski lift

460 2
it loves to lift inside ski. tried rear spring to 3- not much difference. tightened front springs slightly from stock- still not mucy difference. Has anyone tried pulling in limiter straps; if so, what was the result?
That's where i'm leaning towards next. Then stiffening front shock valving with stiffer torsion bar. Comments.
1 - 3 of 3 Posts

71 Posts
Go to my post at:

Take this entire address and paste it - it will lead you directly to the conversation!!!!!

I hope this works for you. It seems that AC has adjusted some machines with that center shock quite aggressively - to the extent that there is quite a bit of inside ski lift. Read the posts and then pay attention to the set-up that Rob refers to - this should fix your problem.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.