Hardcore Sledder banner
1 - 3 of 3 Posts

· Registered
Joined
·
156 Posts
Try rotating the coulper block to #2 to get the skid to transfer faster. If you still have to much lift go to #3 and try that. If you still have to much lift you will need to either adjust the ski pressure or the front shock on the rear suspension. This comes setup from the factory but as some are reporting some of the F's were not setup correctly.
hope this helps, Steve
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top