Hardcore Sledder banner
1 - 2 of 19 Posts

· Registered
Joined
·
679 Posts
First of all, I would like to say that I am very sorry you guys are having these problems and I really hope Cat steps up to the plate and takes care of you guys. :unsure:

I would also like to know it these meltdowns happened before or after we knew about the burping procedure? I have run my sled on the stand and checked the heat exchangeres and the side and rear heat exchangers get nice and warm and everything "seems" fine. But I only have 3.6 miles on my sled. I would hate to think you guys heard about the procedure, did it, and thought everything was fine, and then the sleds still burn downed.

Or was this all prior to the "new" information.

Good luck and keep us updated.
 

· Registered
Joined
·
679 Posts
Originally posted by bosssho+Dec 9 2002, 10:32 PM-->
<!--QuoteBegin-Mike C
@Dec 9 2002, 02:54 PM
First of all, I would like to say that I am very sorry you guys are having these problems and I really hope Cat steps up to the plate and takes care of you guys.  :unsure:

I would also like to know it these meltdowns happened before or after we knew about the burping procedure? I have run my sled on the stand and checked the heat exchangeres and the side and rear heat exchangers get nice and warm and everything "seems" fine. But I only have 3.6 miles on my sled. I would hate to think you guys heard about the procedure, did it, and thought everything was fine, and then the sleds still burn downed.

Or was this all prior to the "new" information.

Good luck and keep us updated.
Mike,

"We" are the reason for the "new" burping procedure...that should tell you if we came first or not. :p

If you did the procedure that Rob was kind enough to post last week and then followed all his updates you should be A ok. Lemme know if you have any other questions.[/b]
Thanks for the info. I was just wondering when these problems had occurred. It is bad enough that these things are happening. But if you guys were aware of the procedure and performed it, and still had these problems, that would be the worst. I guess there was no way to fix, what you didn't know was broken.

I can only imagine what you guys are going through, and I truely hope everything works out for you.
 
1 - 2 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top