[twracer]

check out she screws that come in from the outside and go towards air box they stick into the air box and will wear holes in the air box just take out the torx screw and cut a quarter of a inch off and reinstall them( the screw is ahead of the shock or right beside the remote resivor on snow pro)

 

[Jamie]

Thanks for the heads up, I checked mine to find they pass right into the air box, I wonder if they should, just to hold the airbox in place?

 

[VFRcanada]

Just finished checking mine. They where just starting to poke a hole into the airbox. Not all the way through yet. Looks like I caught it in time. You don't have to take the airbox off to fix this but you may want to to see if they have poked through.

PS,
I found a bolt laying in the bottom of the belly pan under the airbox. Looks like somebody at the factory is as bad at dropping things as I am.